1.1 1.2 1.3
Label printer SQUIX 2 SQUIX 4.3 SQUIX 4 SQUIX 6.3
Material feed Left-aligned
Printing method: Thermal transfer
Printing method: Thermal direct
Printable resolution dpi 300 600 203 300 300 600 203 300
Print speed up to mm/s 250 150 250 250 300 150 250 250
Print width  up to mm 56.9 54.1 104 108.4 105.7 105.7 168 162.6
Print start: Distance to locating edge mm 2 2.8 1.2 2 0.5 3.2
Material
Roll, fanfold: Paper, cardboard, PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
Roll, fanfold: Smart Labels
Roll, fanfold: Ready-for-use shrink tubes
Labels1) Width mm 4-63 20-116 46-176
Labels  Height without label backfeed2) from mm 4 4 6
Labels  height with label backfeed2) from mm 4 6 12
Labels height with label backfeed when dispensing from mm 6 6 12
Labels Maximum height mm 2,000
Labels Thickness mm 0.03-0.60
Carrier material Width mm 24-67 24-120 50-180
Carrier material Thickness mm 0.03-0.16
Continuous material Width mm 24-67 24-120 50-180
Continuous material Thickness mm 0.05-0.50
Continuous material Weight (cardboard) up to g/m2 300
Shrink tubes Width ready-for-use up to mm 120
Shrink tubes Thickness up to mm 1.1
Roll, reel: Outside diameter with core diameter mm 205 / 38.1 – 76
180 / 100
Roll, reel Winding outside or inside
Ribbon3)
Ink side outside or inside
Roll diameter up to mm 80
Core diameter mm 25.4
Variable length up to m 450
Width mm 25-57 25-114 50-170
Internal rewinder in peel-off version
Outside diameter up to mm 142
Core diameter mm 38.1 – 40
Winding outside
Printer sizes and weights
Width x Height x Depth mm 200x288x460 252x288x460 312x288x460
Weight kg 9 10 14
Label sensor with position indication
Gap sensor for labels, punch marks or print marks in transparent materials and end of material
Reflective sensor from below or top for print marks in not transparent materials and end of material
Distance sensor to locating edge left-aligned mm 5-26 5-60 5-60
Height of material gap up to mm 2
Electronics
Processor 32 bit clock rate MHz 800
Main storage (RAM) MB 256
Data storage (IFFS) MB 50
Slot for SD memory card (SDHC, SDXC) up to GB 512
Battery for time and date, real-time clock
Data storage when power is off (e.g. serial numbers)
USB WLAN stick 2.4 GHz 802.11b/g/n                                             (included as extra item in the scope of delivery)
Interfaces
RS232C 1,200 to 230,400 baud/8 bit
USB 2.0 Hi-Speed device to connect a PC
Ethernet 10/100 BASE-T LPD, IPv4, RawIP printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, NTP, Zeroconf, SOAP web service, VNC
1 x USB host at the operation panel for
1 x USB host at the operation panel for
Service Key or USB memory stick
USB WLAN stick 2.4 GHz 802.11b/g/n
2 x USB host on the back side for Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick
WLAN 802.11b/g/n, hotspot or infrastructure mode GHz                                                                                       2.4  / 5
Periphery connection USB host, 24 VDC
Digital I/O with 8 inputs and outputs Peel-off/basic device                                                                                         /
Operating data
Power supply 100 – 240 VAC ~ 50/60 Hz, PFC
Power consumption Standby <10 W / typical 150 W / maximum 300 W
Temperature / humidity: Operation +5 – 40°C / 10 – 85% not condensing
Temperature / humidity: Storage 0 – 60°C / 20 – 85% not condensing
Temperature / humidity Transport –25 – 60°C / 20 – 85% not condensing
Approvals CE, FCC class A, CB, CCC, cUL